Pumpar/Blandare
Visar 1–10 of 12 resultat
-
P200
TUMAC P200 är speciellt gjord för att pumpa betong av olika kvaliteter. Maskinen är av typ skuvpump där ingående komponenter är anpassade för krävande miljö och tuffa material. Den kraftiga motorn och växellådan är gjord för att klara material med hög densitet. Pumpen har 2 hastigheter, och styrs från elskåpet eller med fjärrmanöverkabel. Pumpmanteln är spännbar för att kunna behålla högt tryck så länge som möjligt. Standard koppling för slang är 50 mm kamkoppling. Olika slangdimensioner och längd kan fås efter önskemål. De stora gummihjulen gör att maskinen är enkel att flytta. Pumpen är försedd med domkrafter i varje hörn för att stå stadigt vid pumpning. TUMAC´s maskiner är egen design och tillverkningen sker i Järfälla, Stockholm.
-
Mixers – M100
M100 – Rapid mixer is a batch mixer for 100 liters ready mixed material. Perfect for most types of plaster, mortar, and concrete and self-leveling floor screed etc. By a high speed and the twisted wings the mixing effect is very high. This mixer can be used separately or together with our pumps P50-P70. A time relay guarantees the right mixing time and a pneumatic assembly make the mixer easy to empty.
-
P50/P70
P50/P70 – Our most well known plaster pump in two versions.
P50/P70 can be used for almost every kind of applications such as coating, rendering etc. and can pump cement-lime stone and gypsum based plaster, grout, concrete, self levelling material, fire-proof materials, injection material, jointing etc. with aggregate up to 3 or 8 mm. Both machines can be equipped with stator and rotor with higher capacity. P50 and P70 are equipped with a mechanical variator easy to adjust for different capacity.
-
P10
P10 – A single speed pump
P10 is a pump for all type of plasters, coating and grout. Suitable for jointing, injections, bolting masonry, fire proof material etc.
Our mixer M50 is made to match our pumps P10-P20 is size and capacity.
-
M50/M100
M100 – Rapid mixer is a batch mixer for 100 liters ready mixed material.
Perfect for most types of plaster, mortar, and concrete and self-leveling floor screed etc. By a high speed and the twisted wings the mixing effect is very high. This mixer can be used separately or together with our pumps P50-P70. A time relay guarantees the right mixing time and a pneumatic assembly make the mixer easy to empty.
-
P15
P15 – 2-speed machine
P15 can be used for sand filler, plastic plaster, rendering plaster and almost every cement and limestone based material in-and outdoors.
P15 is made for rough stuff on buildings site.
-
P18
18 – The professional machine with a wide range of applications:
P18 has machinery with a mechanical variator.
It is well suited for works where variations of the material flow are necessary.
P18 is excellent for thin coat plasters, texturing plaster, concrete renovation and many others.
-
P20
P20 – Single-phase 230V pump with frequency inverter
P20 can be used for most applications such as coating, rendering etc. It is excellent where a lower capacity is desirable such as finishing plaster, mineral paints, fine coating etc. The machine can be programmed for a wide range of speed, acceleration etc. to match yourmaterial.
-
Reservdelar
-
Tillbehör
Säcktömmare, lock & slanghållare