P10 – A single speed pump
P10 is a pump for all type of plasters, coating and grout. Suitable for jointing, injections, bolting masonry, fire proof material etc.
Our mixer M50 is made to match our pumps P10-P20 is size and capacity.
P15 – 2-speed machine
P15 can be used for sand filler, plastic plaster, rendering plaster and almost every cement and limestone based material in-and outdoors.
P15 is made for rough stuff on buildings site.
P18 – The professional machine with a wide range of applications:
P18 has machinery with a mechanical variator.
It is well suited for works where variations of the material flow are necessary.
P18 is excellent for thin coat plasters, texturing plaster, concrete renovation and many others.
Se vårt produktblad, här.
P20 – Single-phase 230V pump with frequency inverter
P20 can be used for most applications such as coating, rendering etc. It is excellent where a lower capacity is desirable such as finishing plaster, mineral paints, fine coating etc. The machine can be programmed for a wide range of speed, acceleration etc. to match yourmaterial.
SEAL
All pumps can be equipped with a seal to protect the material during the pumping. Material
that is air harden, plaster, grout, paint etc. will be protected and keep its consistency much longer.
Se vårt produktblad, här.
Reservdelsprislista
Hittar du här:
http://www.tumac.se/Prod_blad/Reservdelslista_P10-P20.pdf
Säcktömmare
Lock
Slanghållare