Pumps / Mixers
Showing 1–10 of 12 results
-
Bland Pump – MP85
MP85 - Mixer Pump for flooring
MP85 is a further development of Mixothab blender pumps.
For continuous mixing and simultaneously pumping of various kinds plaster and screed.
MP85 is particularly suited for use with high air content and pumping of self leveling screed.
The machine is equipped with a pressure increase pump to keep the water pressure remains.
The mixer has a speed and pump has two speeds.
The pump tank sits an agitator shaft that moves on while the material is ripening in the tub.
-
M50 / M100
M100 – Rapid mixer is a batch mixer for 100 liters ready mixed material.
Perfect for most types of plaster, mortar, and concrete and self-leveling floor screed etc. By a high speed and the twisted wings the mixing effect is very high. This mixer can be used separately or together with our pumps P50-P70. A time relay guarantees the right mixing time and a pneumatic assembly make the mixer easy to empty.
-
Mixers – M100
M100 – Rapid mixer is a batch mixer for 100 liters ready mixed material. Perfect for most types of plaster, mortar, and concrete and self-leveling floor screed etc. By a high speed and the twisted wings the mixing effect is very high. This mixer can be used separately or together with our pumps P50-P70. A time relay guarantees the right mixing time and a pneumatic assembly make the mixer easy to empty.
-
Mixers – M50
M50 – Rapid mixer for 50 liters ready mixed material.
Perfect for most types of plaster, mortar, concrete and self-leveling floor screed etc. by a high speed and the twisted wings the mixing effect is very high. This mixer can be used separately or together with our pumps P10-P20.
-
P10
P10 – A single speed pump
P10 is a pump for all type of plasters, coating and grout. Suitable for jointing, injections, bolting masonry, fire proof material etc.
Our mixer M50 is made to match our pumps P10-P20 is size and capacity.
-
P15
P15 – 2-speed machine
P15 can be used for sand filler, plastic plaster, rendering plaster and almost every cement and limestone based material in-and outdoors.
P15 is made for rough stuff on buildings site.
-
P18
18 – The professional machine with a wide range of applications:
P18 has machinery with a mechanical variator.
It is well suited for works where variations of the material flow are necessary.
P18 is excellent for thin coat plasters, texturing plaster, concrete renovation and many others.
-
P20
P20 – Single-phase 230V pump with frequency inverter
P20 can be used for most applications such as coating, rendering etc. It is excellent where a lower capacity is desirable such as finishing plaster, mineral paints, fine coating etc. The machine can be programmed for a wide range of speed, acceleration etc. to match yourmaterial.
-
P200
TUMAC P200 is specially designed to pump concrete of various grades. The machine is of type skuvpump where the components are designed for harsh environments and tough materials. The powerful motor and gearbox are designed to cope with high density material. Pumpen har 2 speeds, and controlled from the control cabinet or the remote control cable. Pump casing is tensioned to maintain high pressure as long as possible. Standard coupling for hose is 50 cam clutch, etc.. Different tube sizes and length are available on request. The large rubber wheels makes the machine easy to move. The pump is equipped with jacks in each corner to stand firmly when pumping. TUMAC's machines are custom design and manufacturing is in Järfälla, Stockholm.
-
P50/P70
P50/P70 – Our most well known plaster pump in two versions.
P50/P70 can be used for almost every kind of applications such as coating, rendering etc. and can pump cement-lime stone and gypsum based plaster, grout, concrete, self levelling material, fire-proof materials, injection material, jointing etc. with aggregate up to 3 or 8 mm. Both machines can be equipped with stator and rotor with higher capacity. P50 and P70 are equipped with a mechanical variator easy to adjust for different capacity.